Showing all 2 results
|Print width||6.61 in|
|Print speed||479.5 inches per minute|
|Interface||Parallel, USB, LAN, Serial|
|Media Type||Continuous Forms, Labels|
|Barcodes||CODABLOCK, Codabar, Code 11, Code 128, Code 128A, Code 128B, Code 128C, Code 39, Code 49, Code 93, Data Matrix, EAN/JAN-13, EAN/JAN-8, GS1 DataBar, ISBT 128, Industrial 2 of 5, Interleaved 2 of 5, LOGMARS, MaxiCode, MicroPDF417, PDF417, PLANET, Plessey, Postnet, QR code, TLC39, UPC, UPC-A ,UPC-E|
How do I install my Zebra 170xiiii plus?
Connect your printer to your computer using USB cable,serial cable or parallel cable from its package.Download the printer driver from Zebra\'s website and install it on your computer.Follow the instructions given by the Printer Setup Wizard to complete the installation process.
What are the label sizes for the Zebra 170xiiii plus?
The Zebra 170xiiii plus can print continuous forms,fanfold paper,and labels up to 6.61 inches wide and 39 inches long.The maximum media roll size is 7.1 inches.
How do you reset a Zebra 170xiiii plus?
- Please turn off your printer and close its top cover
- Long-press the Feed button for several seconds then push the power button
- The indicator light will start flashing.After it flashes four times,release the Feed button.
- Your printer now resets to factory default settings.
How do you calibrate the Zebra 170xiiii plus?
Your printer will perform an auto-calibration once it feeds media after closing the printhead and after turning it on.It will automatically set the value it detects for the spaces between labels.Auto-calibration also occurs as part of both the sensor profile and media and ribbon sensor calibration procedures.
Download Zebra 170xiiii plus Driver Here.