Filter

Showing all 5 results

2-1/4″ x 4″ Direct Thermal Labels – 1″ Core

350 Labels / Roll1 inch Core

Quantity

Choose a quantity

AS LOW AS $5.78

1-1/4″ x 1″ Direct Thermal Labels – 1″ Core

1300 Labels / Roll1 inch Core

Quantity

Choose a quantity

AS LOW AS $6.96

1-1/2″ x 1/2″ Direct Thermal Labels – 1″ Core

2350 Labels / Roll1 inch Core

Quantity

Choose a quantity

AS LOW AS $6.60

1″ x 1/2″ Direct Thermal Labels – 1″ Core

2430 Labels / Roll1 inch Core

Quantity

Choose a quantity

AS LOW AS $6.96

2″ x 2″ Direct Thermal Labels – 1″ Core

750 Labels / Roll1 inch Core

Quantity

Choose a quantity

AS LOW AS $6.54

Resolution	203 dpi
Print width	4.09 in
Print speed	359.1 inches per minute
Interface	USB, LAN, Serial
Media Type	Continuous Forms, Die cut Labels, Labels, Tag Stock
Barcodes	Aztec Code, CODABLOCK, Codabar, Code 11, Code 128, Code 128A, Code 128B, Code 128C, Code 39, Code 49, Code 93, Data Matrix, EAN-UCC Composite, EAN/JAN-13, EAN/JAN-8, GS1 DataBar, Industrial 2 of 5,I nterleaved 2 of 5, LOGMARS, MSI-Plessey, MaxiCode, MicroPDF417, PDF417, PLANET, Plessey, Postnet, QR code, Standard 2 of 5, TLC39, UPC-A, UPC-E
Width	10.7 in
Depth	18.8 in
Height	11.6 in
Weight	27.34 lbs

How do I install my Zebra S6M?

Connect your printer to your computer using USB cable,serial cable or parallel cable from its package.Download the printer driver from Zebra\'s website and install it on your computer.Follow the instructions given by the Printer Setup Wizard to complete the installation process.

What are the label sizes for the Zebra S6M?

The Zebra S6M can print continuous forms,die cut labels,labels,and tag stocks up to 4.09 inches wide and 157 inches long.The maximum media roll size is 4.5 inches.

How do you reset a Zebra S6M?

Please turn off your printer and close its top cover
Long-press the Feed button for several seconds then push the power button
The indicator light will start flashing.After it flashes four times,release the Feed button.
Your printer now resets to factory default settings.

How do you calibrate the Zebra S6M?

Your printer will perform an auto-calibration once it feeds media after closing the printhead and after turning it on.It will automatically set the value it detects for the spaces between labels.Auto-calibration also occurs as part of both the sensor profile and media and ribbon sensor calibration procedures.

Download Zebra S6M Driver Here.

Zebra S6M Label