4″ x 6″ FanFold Zebra Compatible Labels, 1 Label Per Fold (500 Labels / Stack)

AS LOW AS: $19.65
Select

4″ x 6″ FanFold Zebra Compatible Labels, 2 Labels Per Fold (1000 Labels/Stack)

AS LOW AS: $32.78
Select
Resolution300 dpi
Print width4.09 in
Print speed840.9 inches per minute
InterfaceUSB 2, LAN, Serial, USB Host, Bluetooth 2.1 EDR
Media TypeContinuous Paper Labels, Die cut Labels
BarcodesAztec Code, CODABLOCK, Codabar, Code 11, Code 128A, Code 128B, Code 128C, Code 39, Code 49, Code 93, Data Matrix, EAN/JAN-13, EAN/JAN-8, ISBT 128, Industrial 2 of 5, Interleaved 2 of 5, LOGMARS, MSI-Plessey, MaxiCode, MicroPDF417, PDF417, PLANET, Plessey, Postnet, QR Code, Standard 2 of 5, TLC39, UPC-A, UPC-E
Width10.6 in
Depth9.5 in
Height12.8 in
Weight36 lbs

How do I install my Zebra ZT410?

Connect your printer to your computer using USB cable,serial cable,or parallel cable from its package.Download the printer driver from Zebra\'s website and install it on your computer.Follow the instructions given by the Printer Setup Wizard to complete the installation process.

What are the label sizes for the Zebra ZT410?

The Zebra ZT410 can print continuous paper labels and die cut labels up to 4.09 inches wide and 157 inches long.The maximum media roll size is 4.25 inches.

How do you reset a Zebra ZT410?

  1. Please turn off your printer and close its top cover
  2. Long-press the Feed button for several seconds then push the power button
  3. The indicator light will start flashing.After it flashes four times,release the Feed button.
  4. Your printer now resets to factory default settings.

How do you calibrate the Zebra ZT410?

  1. Turn off the printer
  2. Long-press the FEED and PAUSE buttons both at the same time
  3. Turn on the printer and wait for it to conduct a self-test before releasing the buttons
  4. The printer will reset and will start feeding some labels so it can "read" dimensions.

Download Zebra ZT410 Driver Here.

membership get free expedited shipping enkoproducts